Normal Inlet Temperature Air Cooling Air Dryer

Description
Normal inlet temperature air dryer adopts water cooling method. Thus, it is kind of water-cooling air dryer. It employs filter type gas-liquid separator so as to achieve complete gas-liquid separation effect and avoid second evaporation. Compared with cyclone separator, this gas-liquid separator features high separation efficiency (as high as 99.99%). Besides, this normal inlet temperature air dryer makes use of stainless steel pipe, so such water-cooling air dryer is applicable in medical and food processing field. In addition, it utilizes multi control circuits so as to meet different requirements of clients.

Features
1. Normal inlet temperature air dryer is equipped with perfect cooling system. Its key parts are imported famous brand products. This guarantees the treatment effect and at the same time ensures its stable operation and service life.
2. This water-cooling air dryer uses zinc plated copper pipe. And it working pressure is optional from 0.3 to 4.5 MPa.
3. The air heat exchanger adopts inside and outside wall corrugated pipes so as to increase its capacity utilization. Besides, this normal inlet temperature air dryer has reverse-flow structure, making it impossible to form dews.
4. This water-cooling air dryer employs hydrophilic treatment thin wall copper belt pure aluminum fins for its evaporator. Such turbulence structure features high heat exchange efficiency.
5. Our normal inlet temperature air dryer is installed with excellent boiler blow down system, and this can effectively let out large volume of condensate water and greasy dirt, make the air clean and dry and meanwhile can reduce the load on the system.
6. This water-cooling air dryer adopts outer rotor cooling fan which features large blast capacity, low noise and frequent start-stop long life.
7. Its water condenser is characterized by slow flow, multi-stroke, high heat exchange efficiency and long working without scaling.
8. This normal inlet temperature air dryer employs ARMSTRONG foam of flame retardant insulation material so that the cooling capacity can reduce to the least.

Technical Data

Air Inlet Temperature	≤45℃
Cooling Method	Water-Cooling
Inlet Pressure	0.4-1.0MPa
Pressure Loss	≤0.02MPa
Pressure Dew Point	2 to 10℃
Refrigerant	R22
Cooling Water Inlet Temperature	≤32℃
Cooling Water Feed Water Pressure	≤0.2 to 0.4Mpa

Detailed Types

Model		SAD-10 NW	SAD-20 NW	SAD-30 NW	SAD-40 NW	SAD-50 NW	SAD-60 NW	SAD-80 NW	SAD-100 NW	SAD-150 NW	SAD-200 NW	SAD-300 NW
Capacity (Nm³/min)		10.7	25	33	45	55	65	85	110	160	220	300
Power Source (V/Hz)		380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50
Compressor Power (HP/Kw)		3.0/2.23	5/3.8	7.5/5.7	10.5/8	12/9	15/11.3	20/15	24/18	36/27	48/36	80/60
Cooling Water Circulation Volume (Nm³/h)		2.0	3.6	5.0	7.0	9.0	10.0	14.0	18.0	27.0	36.0	55.6
Air Joint Pipe Caliber		DN65	DN80	DN100	DN125	DN125	DN125	DN150	DN150	DN200	DN200	DN250
Condenser Water Pipe Diameter		ZG1	ZG1	ZG1.5	ZG1.5	ZG1.5	ZG1.5	ZG2	ZG2	DN100	DN100	DN100
Weight (kg)		260	470	860	980	1150	1250	1600	2200	3000	3200	4100
Overall Dimension	L (mm)	690	1400	1650	1850	2000	2280	2850	3200	3200	3200	4100
	W (mm)	1140	750	850	850	900	1450	1450	1450	1500	4000	4000
	H (mm)	1065	1130	1380	1385	1385	1950	2205	2205	2205	2205	2580

1. Air Heat Exchanger
2. Evaporimeter
3. Gas-Liquid Separator
4. Drainage Anti-Blocking Filter
5. Manual Blow-Down Valve
6. Refrigeration Compressor
7. Suction Filter
8. Vaporizer
9. Liquid Separator
10. Air-Liquid Mixer
11. Thermal Expansion Valve
12. Sight Glass
13. Dry Filter
14. Reservoir
15. Hot Air Bypass Valve
16. Water Regulating Valve
17. Water Filter
18. Condenser (Air Cooling)
19. Condenser (Water Cooling)
20. Front Pre-Cooler (Water Cooling)
21. Front Pre-Cooler (Air Cooling)
22. Auto-Drainer